Water Soluble Film Embroidery Stabilizer Computer Embroidery Backing DIY Manual Embroidery Pattern Transfer Cloth

Water Soluble Film Embroidery Stabilizer Computer Embroidery Backing DIY Manual Embroidery Pattern Transfer Cloth

Product specification: Specification 1m*200y*35u other specifications can be customized

The cold water soluble film can be used in computer embroidery, and can be used as a cushion at the bottom of embroidery cloth (if the paper lining operation is basically the same), which is water-soluble. As long as you soak it in normal temperature water for about ten seconds, the rubber lining can be completely dissolved and the high-quality embroidery pattern can be presented. In order to meet the needs of the embroidery industry, our factory is now developing and producing a high-tech new product, fast dissolving cold water dissolving film. This product can be completely dissolved in normal temperature water (15 ℃) for 20 seconds and completely dissolved in 2 minutes. There is no residue or harmful substances on the embroidery.

Product use: environmentally friendly cold water soluble film, white color, with embossing. The product can be dissolved in normal temperature water (15 ℃) for 20 seconds, and completely dissolved in 2 minutes. There is no residue or harmful substances on the embroidery, so as to avoid problems such as wrinkling, fading and long processing time caused by hot boiling of high-temperature water-soluble paper. This product is widely used in various high-end underwear, fashion and embroidery occasions of special fabrics.

Product advantages:
1. The product has appropriate strength and can meet various embroidery process requirements;

2. Embossing design ensures that the embroidery needle does not jump, move or shift;

3. The cold water dissolving film has small elasticity, and the thread will not be broken during machine embroidery;

4. Environmental protection, non-toxic, pollution-free, formaldehyde free;

5. The fabric and embroidery thread are not easy to change color and fade after being dissolved in water at normal temperature.

matters needing attention:
1. Do not touch water. Pay attention to the influence of environmental humidity on cold water dissolving film. It is recommended that the embroidery workshop using cold water dissolving film install air conditioners.

2. During the membrane removal treatment, the water temperature should be kept between 15-30 ℃, the amount of dissolved water should be sufficient, and the flowing water should be used as much as possible, so that the treatment will be faster and cleaner.

3. The last pass shall be cleaned with clean water to prevent the cloth from hardening;

4. Timely seal the remaining cold water dissolving film to prevent moisture.